Boost ECX3100A Manuel d'instructions télécharger pdf (Page 7)

boost

WHEN YOU ARE FINISHED

1. Power off Electronic Speed Control (ESC).

2. Power off the Transmitter and Lower Antenna.

Note: To prevent damage to antenna, collapse the antenna by

pulling the lower sections in ﬁrst.

3. Disconnect Battery.

4. Remove Battery from vehicle.

GETTING STARTED

1. Fully extend Antenna and Power on Transmitter.

2. Connect battery to Electronic Speed Control (ESC) and

power on the ESC.

3. Do a Test of Transmitter’s control of vehicle with vehicle wheels

off ground.

4. Start driving slowly and if the vehicle does not go straight,

adjust steering trim dial on Transmitter.

Note: Seat motor brushes by driving smoothly on a ﬂat surface

during use of the ﬁrst battery charge.

1 2 3 4 5 6 7 8 9 10 11 12 ... 17 18

Pas de commentaire

Boost ECX3100A Manuel d'instructions Page 7