Boost i450 Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Téléphones mobiles Boost i450. Motorola i450 Boost Mobile Circuit Board Replacement Manuel d'utilisatio

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 5
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 0
Motorola i450 Boost Mobile Circuit Board
Replacement
This guide provides instructions on how to disassemble the device to access the circuit
board of the device.
Written By: Amber King
INTRODUCTION
The circuit board controls whether any other function of the phone works at all. The circuit
board cannot be replaced without replacing the entire unit, but removing it provides access
to other replaceable parts.
TOOLS:
Anti-Static Project Tray (1)
T5 Torx Screwdriver (1)
T6 Torx Screwdriver (1)
Motorola i450 Boost Mobile Circuit Board Replacement
© iFixit CC BY-NC-SA www.iFixit.com Page 1 of 5
Vue de la page 0
1 2 3 4 5

Résumé du contenu

Page 1 - Replacement

Motorola i450 Boost Mobile Circuit BoardReplacementThis guide provides instructions on how to disassemble the device to access the circuitboard of the

Page 2 - Step 2 — Battery

Step 1 — Back Cover Place the phone on a flat surface with the front facing down.Insert your finger under the gray plastic cover at the bottom end o

Page 3 - Step 3 — SIM Card

Step 3 — SIM Card Locate the metal slider that holds the SIM card in place.Push the slider away from the metal flap which contains the SIM card. The f

Page 4 - Step 5 — Circuit Board

Step 5 — Circuit BoardExtend the antenna.Step 6Remove the four 4.8 mm Torx T6screws from the corners of theback of the phone.If the antenna is not ful

Page 5

To reassemble your device, follow these instructions in reverse order.This document was last generated on 2015-04-27 06:08:31 PM.Step 7 Gently lift

Commentaires sur ces manuels

Pas de commentaire